|21-01-2007||About time you got this fixed!!! :roll:|
|21-01-2007||Replace these caps.C7001,C7014,C7026,C7036. It was just one of them but I can't remember which one it was.
The caps have polarity so mark or remember the negative and positive. It's a filtering cap that's dry and causes this. Comb filter to be exact. Le|
|21-01-2007||Solder up the vertical ic. You may be looking at a bad tube.|
|21-01-2007||[quote:961f515806="Frank"][quote:961f515806="minnie"]2SC3788 on the crt brd if you had no red but, Just go into the service menu and adjust red bias.[/quote:961f515806]
Minnie you mean by reducing the red bias the bleeding will go away?Thanks, will|
|22-01-2007||PCB-Y SUS circuit for Toshiba 50HP16||Hi,
I am trying to find a circuit for the Y SUS board used in the Toshiba 50HP16, its not in Tosh's service manual as its made by LG and I expect that tosh just buy them in with the LG panel. I am sure it is used in most plasma's with the 50X3 panel. If |
|22-01-2007||JVC JVC AV 48WP55 - Ticking noise in the back of the TV||I was watching a movie when suddendly I heard a "pop" in the back of the TV (JVC AV 48WP55 ). I tried to reset the system by unplugging it for a couple of hours, but when I plugged it back in, I heard nothing but a ticking sound in the back of t|
|22-01-2007||JVC AV 48WP55||Do you have a manual for the JVC AV 48WP55 ? I could really use one - Thanks, Charles|
|22-01-2007||75003042 is Toshiba's part # for the Y sustain board. Are you trying to trouble shoot it?|
|22-01-2007||This is the model where the TDA6111Q fries on the crt board. IC1001, IC2001 and IC 3001 on the respective board. There's a 4 pin wire that goes from the rear of the set to I believe the green crt board and jumps to the red and blue crt boards. Yellow and |
|22-01-2007||You could have a bad tube. Have you tried rejuvenating it?|
|22-01-2007||Minnie i don't have a juvenator. i turned down the red bias and the bleeding goes away, but it seems that after awhile of beeing on gets kind a vertical 4"band verticaly and pic fads away and i have to unplug it from the wall, and only turns back on|
|22-01-2007||Exact same problem on AIWA SA-2151||I have just experience the exact same problem that you described. Though I was playing with a Universal Remote Control at the time.
I can't get the sound back.
Did you manage to find a solution?|
In fact it's still available via Apple GSX.
thanks aafuss1 but i dont have this account
* Please specify Sold-To Account # :
i hope someone help me thanks my email firstname.lastname@example.org
just one service manual i need, "apple s|
Yeah, I have two faulty boards which I need to repair. But I am having difficulty finding a circuit diagram for this PCB.
|22-01-2007||Samsung HD TV TXM3096 WHF||My TV has no picture or lights but has a ticking sound when plugged in.|
|22-01-2007||Manufactory’s warranty? Replace the X and Y sustain and power supply. Is the fuse blown on the sustain board? Or is this an out of warranty fix?|
|22-01-2007||Flyback rings a bell on this model. I'd replace the HOT also.|
|22-01-2007||White raster, move yolk back and forth, If correct purity can't be obtained leads me to a degausing problem or bad tube?|
|22-01-2007||The ads on that site give me a headache|
|22-01-2007||These are board level repairs as far as Toshiba is concerned. If you have two bad sustain boards I point at the pdp. "Panel"|
|22-01-2007||I have some experience with electronics. Being that I am a student, can I do this myself? Will a service manual tell me what to buy and the steps necessary to take?
|22-01-2007||Do you have a service manual for the JVC AV 48WP55? My email is email@example.com. Thanks, Charles|
|22-01-2007||PASSWORD REMOVEL||HI FRIENDS,
I NEED TO REMOVE PASSWORD FROM DELL 510 INSPIRON I ALREADY SHOT BATTARY BIT STILL NOT GOING PASSWORD CAN ANY BODY HELP.|
|22-01-2007||this set is fitted with the poor quality 11ak45 vestel chassis, reprogramming or replacing the eeprom will probably cure your fault.|
|22-01-2007||[b:ba37a23d42]Garmin StreetPilot c320 Mobile GPS Receiver [/b:ba37a23d42]: $306.79
Length: 6.5, Width: 6.5, Height: 6.5, Weight: 1.81.
3.5", 16-bit color transflective TFT LED touch-screen with backlight.
Automatic route cal|
|22-01-2007||None the less all the manuals are free? Even most of the ones your site is trying to sell us, me personally I can live with the banners as long as I don’t have to pay some site like yours money for what I can get for free.
|22-01-2007||TV Realistic portavision 250 service manual||Hi,
I'm looking for the service manual of this tv:
realistic portavision 250
and it is trademarks of tandy corporation.
The tv is from a friend of mine, but I want to repair it for him.
Does anyone has this manual or knows where I |
|22-01-2007||JVC LT-30E45SU service manual wanted||I need this LCD service manual.
Thanks in advance.
|22-01-2007||[b]SONY MHC-771-Audio Center- Stoped playing-No Lights Etc.[||Hi,
Re: SONY MHC-771-Audio Center- Stoped playing-No Lights Etc.
1/ Need urgent help with my Audio center -Sony MHC-771.
Suddenly stopped playing, went all dark, no lights,etc..
When it was working: when switched On : as always after 2-3 sec|
|22-01-2007||My skill same picogsm, any one have project with microcontroller or plc maybe can contact me.
These are out of warranty repairs, the PDP,s are fine as I have tested them with working cards, one the cards seems to have a short circuit in the energy recovery circuit and the other one only has the negitive half of the Y drive waveform no + 193v.|
|22-01-2007||EPSON EPL-N7000||Where can I find the service manual epl-n7000 ?
thanks in advance|
|22-01-2007||Re: JVC JVC AV 48WP55 - Ticking noise in the back of the TV||[quote:1183b115bf="Anonymous"]I was watching a movie when suddendly I heard a "pop" in the back of the TV (JVC AV 48WP55 ). I tried to reset the system by unplugging it for a couple of hours, but when I plugged it back in, I heard nothing but a |
|22-01-2007||27" zenith Advanced System 3||I just aquired a Zenith TV but the front door that contains the controls got cut off. So I need the service manual so I can reconnect the wires to the clip. I found the replacement part but don't know the order the wires go in. The model # is SE5759Y. If |
|22-01-2007||KP53S75 Convergence Problem||I have ghost images on my TV and I've read that it's because of the convergence board. Is this an item that can be purchased? Or, do I have to have a repairman come to my home and replace it? If I can do it myself, I'd like to know where I can order th|
|22-01-2007||By the way, you can email me directly at firstname.lastname@example.org|
|22-01-2007||Re: EPSON EPL-N7000||[quote:7e99053a3f="Jandruss"]Where can I find the service manual epl-n7000 ?
thanks in advance[/quote:7e99053a3f]
$10.79 and instant download.|
|22-01-2007||Its not avaialble for free anywhere, unless someone gives it to you.
Do you have something to trade for it?
|22-01-2007||Re: Service Manual for Brother DCP 115C||[quote:2b1486b16e="micropoint"]Hello,
I search the service manual for my DCP 115c Brother!!
Please help me!!
Are you sure about that model number? I've got every Brother manual there is, but nothing on that model#
|22-01-2007||panasonic sky box||hi all, i now have 2 of these boxes. one has the fault of no signal recieved and the other one breaks up to squares, seems to be worse with the more content in the picture, e.g a news report is ok to watch but put on say a music channel and it really brea|
|22-01-2007||Toshiba pocket PC e800||Hello !
Have burnt one of the smaller IC on the mainoard of Toshiba e800.
The number is PU11 (PU-11).
Cannot figure out what it is.
Anybody has a wiring diagram or knows what this is to replace ?
Help help :roll:|
|22-01-2007||my omnitronic cd player||hi can anybody please help, i have a amnitronic dual cd-player cdp-381 my problem is when i press open/close the cd door opens sometimes and sometimes it dont its driving me mad i belive there is a magnet inside on top of the laser it dont seem to be a el|
|22-01-2007||I've been told that something may be wrong with the power supply? It should be noted that I hbelieve a little fluid inside the blue tube leaked out onto the board. I cleaned it up twice with 95% alcohol and cotton swabs (once and then four days later), bu|
Does anyone know where to download a nice database, where you can save your TV faults.
So that when you perhaps are stuck with a fault, you can search your database, to see if you have had that fault before.
I have been looking for a access t|
|22-01-2007||Pioneer VSX-808 RDS||Hi Paul,
I have the schematics for the Pioneer SX 780 (Tuner Amplifier) and the Pioneer VSX D-508 to trade
Do you have the service manual for the Pioneer VSX-808 RDS Receiver?