Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs

Post a reply
Username
Subject
Message body Emoticons View more Emoticons	Font colour: Default Dark Red Red Orange Brown Yellow Green Olive Cyan Blue Dark Blue Indigo Violet White Black  Font size: Tiny Small Normal Large Huge Close Tags [quote="Swann1"]Hello all, This is my first posting on here, and my first television repair! so here goes. I'm currently trying to locate a problem with a Sanyo 28inch TV controlled by a Phillips UOC. The set appears to be dead, however, I’ve tested the start up, the HOT and the LOPT - well all the voltages appear to be about correct - I think the problem is the CRT heater as when the system is on I get no orange glow from the base of the tube -even with all the lights of in a dark room I get no light at all- but the required voltages seem to be present (~7V). I have also put an ohmmeter across the heater to try and measure the DC resistance, which, from what I’ve read, should be a filament, but I get an infinite resistance??? My questions are as follows, 1) Would the infinite resistance imply that the heater has gone open circuit, or is this usual for this type of heater? 2) Would this completely disable the set, or can the electrons travel on indirect heating alone? - Note: I’m getting nothing from the front of the screen at all! Any help on this matter would be greatly appreciated, as I mentioned, this is my first TV repair - well, that's not including the one I blew up in the process of repairing a few years ago. Kindest regards Steven[/quote]
Options HTML is OFF BBCode is ON Smilies are ON	Disable BBCode in this post Disable Smilies in this post

All times are GMT

Latest Service Manuals : P05 Philips • stp6na60-fi ST • philips+32hfl4372d 10+chassis+q552.1he+l • XR-DB10/DB20 Aiwa • 07tx NOKIA • NV-J40 Panasonic • 25MN1550 25MN1356 25MN1350 28MN1370 28MN • la14 rsb schematics Wistron • 2sd2140 Inchange Semiconductor • mai1 v panasonic •