 Posted: Thu Feb 01, 2007 9:51 pm Post subject: Re: ERROR CODES |
|
| Hello , I have the same problem with a 42pf9630/78 , but the red led is blinking continously. Do you know about this problem? Please post me
Thank at all Sergio Minutti - Argentina |
|
| Posted: Wed Jan 31, 2007 2:27 pm Post subject: |
|
| I have two of those tv and they have the same problem.When i push the power buton to open them the screen gets red and i must push it again to closit and reopen it and then its ok. But sometimes after i do that and while im watcing tv the screen gets red closes and reopens by herself or stays closed and the red light blinks fast.sorry for my english and thanks for any help
please help me |
|
| Posted: Tue Jan 09, 2007 2:25 pm Post subject: Re: ERROR CODES |
|||
hello guys where can i find those codes? |
|||
| Posted: Sat Sep 23, 2006 6:09 pm Post subject: ERROR CODES |
|
| Here is some error codes.Take a look.
Error code 20. Four LEDs flashing]. Replace microprocessor IC7115. Error code 9. Three LEDs flashing]. Replace IC7430 (TDA4680/U5) on small signal panel Error code 6. Three LEDs flashing]. Replace IC7600 (TDA8417/V3) on small signal panel. SDS Mário Duarte Santos - Portugal |
|
| Posted: Fri Sep 22, 2006 5:07 pm Post subject: PHILIPS 29PT9413/12 IS DEAD AND THE LED IS BLINKINK |
|
| {29pt9413/12}When i start the tv she is going to start but the led starting flashing and somthing i hear to make a tik-tik but very low .
the BU2520 is ok and i change the capasitor 2.2n. if i pull out the BU2520 and i put a resistant when i turn on the tv she is going to start , the led is green and i have 140V to the C of BU2520 and after 4 or 5 seconds the led is blinking again red and i hear the sound. thanks........ |
|