| Author |
Message |
| cory |
 Posted: Fri Mar 02, 2007 1:13 pm Post subject: |
|
theese models with h series have a jumper that goes cold soldered under plastic housing that is on top of convergence ics.plastic housing puts pressure on jumper.remove plastic housing and look for jumper close to rear part of board beside deflection pcb.also it takes out one or more pico fuses.check all(6 or  . |
|
 |
| ttt42 |
| Posted: Fri Mar 02, 2007 12:10 am Post subject: |
|
| sure will, Thanks |
|
|
| Yanmar |
| Posted: Thu Mar 01, 2007 5:33 pm Post subject: |
|
Probably stk-392-110 need to be replace. It's convergeance ic. Check the big resistor too near of stk's.
Bye |
|
|
| ttt42 |
| Posted: Thu Mar 01, 2007 2:51 pm Post subject: Toshiba 55H70 Died |
|
I have a 55" Rear Projection Toshiba Theatre View Tv. Model = Toshiba 55H70. Last night the screen went black and the power light started blinking.The only way to stop the blinking light is to unplug the set. When I plug it in again, after about 30 sec. there is a "click" sound and light starts blinking again. Will this be an expensive fix?
Thanks for the help |
|
|