Author |
Message |
Vintageman |
Posted: Mon Jul 16, 2007 6:45 pm Post subject: Schematic for Compaq power supply |
|
I wish to thank the guest who helped me with the output of my power supply. This helped me very much, and will make my project much easier.
Also I will make sure there is a load on the supply so as not to 'smoke it'!
Again...thanks.
Lynn |
|
 |
Guest |
Posted: Mon Jul 16, 2007 1:30 pm Post subject: |
|
blak led is gnd red is +5v yellow is +12 any meter can tell you that but no meter can tell you t5o have the mother loaded otherwise smoke |
|
 |
Vintageman |
Posted: Sun Jul 08, 2007 3:51 pm Post subject: Schematic for Compaq computer power supply. |
|
I have an old (4 or so years old) Compaq power supply. I wish to use it as a power supply for an LED lighting project. BUT I do not have a schematic, nor know what leads give what power so I can not be sure what is what. I would rather operate from known data rather then just using a multi-meter on it. Does anyone have the data for the following supply?
Model: DPS-200PB-103E REV 02 P/N: 152769-001
Spare Number: 153652-001
Thanks to all for any help forth coming.
Lynn |
|
 |