 Posted: Wed May 28, 2008 7:41 am Post subject: No read discs |
|
| The fact that the logic ic,s are running hot means they are faulty, usually due to spin motor u/s, due to dry bushes. Sometimes, by unplugging spin motor, lubing with thin oil, applying 5v from a batt in both directions, till freed up, can resurrect spin motor. However, if still no work in circuit-ie no disc- can r/p c,s- if can find supplier!. | |
| Posted: Tue May 27, 2008 9:35 pm Post subject: |
|
| Probably needs the optic assembly replaced. Some of the optics run you more than buying a new unit. | |
| Posted: Tue May 27, 2008 8:19 pm Post subject: Philips DVD951 cant read discs. |
|
| When i put a disc it READ..READ..READ..NO DISC.
I've already clean the lens. The voltages of PSU: EH-B=0208 +12=11.6v +5Vstby=4.7v -40=-38.5v EH-B=0205 3V3=3.23v +5=4.7 +6Vstby=5.5v -5 , -8Stby =-9.3v Also on the Basic Engine Board ,BA5938FM and BA6856FP goes very hot! Any opinions?? |
|