| Author |
Message |
| inkaz |
 Posted: Tue Sep 02, 2008 9:02 pm Post subject: |
|
Why do you want to erase the error buffer? Notes there does not affekt any funktion of the set. If you necessary must... there is two way´s.
Get a´"DST" service remote (not longer avaible) Or short the service jumper marked SAM on the signal board while starting upp with main switch. Yers ago when I had a MD2.2 chassie to repair so I don,t remember where posision for the jumper is. But it,s placed on ssb.
Good luck.
| polaret wrote: |
The TV has been repaired
The fault was burned capasitor (blue 220n/2-3k to the horizontal out ) and IRF 620 .
But now i have to erase the fault from service mode any help how to get in? |
|
|
 |
| polaret |
| Posted: Sun Aug 31, 2008 11:11 am Post subject: |
|
The TV has been repaired
The fault was burned capasitor (blue 220n/2-3k to the horizontal out ) and IRF 620 .
But now i have to erase the fault from service mode any help how to get in? |
|
|
| polaret |
| Posted: Sun Aug 31, 2008 9:56 am Post subject: |
|
| Does anyone know how can i get to service mode? |
|
|
| skila |
| Posted: Tue Aug 19, 2008 8:20 am Post subject: |
|
| You'd better connect manufacturer. |
|
|
| polaret |
| Posted: Tue Aug 19, 2008 7:04 am Post subject: philips 32pw/blinking |
|
| Hello i have a philips 32 pw9763/32 TV and the problem is that doesn t power on and the led blinking continious any help? |
|
|