| Author |
Message |
| ticks4doogs |
 Posted: Thu Feb 05, 2009 4:03 am Post subject: hitachi 53fdx01b |
|
Finally found it. thanks for all your help. TV's working good now. Took a good time searching thru the signal board and located the empty spots for them.  |
|
 |
| Guest |
| Posted: Sun Feb 01, 2009 8:14 pm Post subject: |
|
| Still trying to find the correct location for these caps, I'll look through it all. |
|
|
| Guest |
| Posted: Sun Feb 01, 2009 8:05 pm Post subject: |
|
| thanks jts1957. looks like this is exactly what I was looking for. |
|
|
| jts1957 |
| Posted: Sat Jan 31, 2009 7:45 am Post subject: |
|
Maybe this will help.
I assume the two surface mount caps go on the bottom of the signal board at the R0C3 and R0C4 locations.
I presume they are currently unused/empty.
The parts list and signal board schematic (1 of 3) upper right corner - show R0C0, R0C1, R0C2, R0C5, R0C6, R0C7 and R0C8 but No R0C3 or R0C4.
http://www.scribd.com/doc/6982123/Dp05-Chassis |
|
|
| ticks4doogs |
| Posted: Sat Jan 31, 2009 5:25 am Post subject: 53fdx01b |
|
| yes this is the problem I'm having. But I can't find a schematic to show where to install chips. |
|
|
| jts1957 |
|
|
| minnie |
| Posted: Fri Jan 30, 2009 11:24 pm Post subject: |
|
| Sounds more like a flex controller problem. I don't see any bulletins about changing caps on this one. |
|
|
| ticks4doogs |
| Posted: Fri Jan 30, 2009 10:49 pm Post subject: hitachi 53fdx01b picture goes out when watching dvd. |
|
| I'm looking for information on installing the caps described on Hitachi PTV0017 service bulletin. I have the capacitors, but I need to find where they go. Any help, please? |
|
|