Author Message
drizzle67
PostPosted: Mon Mar 02, 2009 10:56 pm    Post subject:

Thanks minnie, i'll check them when i get home. I just got a service manual so hopefully that will help. I'll let you know more as i progress. Thanks again!
minnie
PostPosted: Mon Mar 02, 2009 6:58 pm    Post subject:

You can check the 3.9 ohm resistors and the pico fuses.
Justmanuals
PostPosted: Sat Feb 28, 2009 1:58 am    Post subject:

This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com


[email protected]
drizzle67
PostPosted: Sat Feb 28, 2009 12:53 am    Post subject:

Yea, there is no fluid, it has been sitting for 3 weeks or so. is there a way to check the ic's without replacing them?
thanks for the speedy reply by the way! this forum is awesome just for that! Very Happy
minnie
PostPosted: Sat Feb 28, 2009 12:40 am    Post subject:

Check for fluid on the boards, or suspect convergence IC's.
drizzle67
PostPosted: Sat Feb 28, 2009 12:33 am    Post subject: samsung hcm5525w wont turn on, red timer light stays on!

So i have a 55" rear projection samsung that will not power on. When you plug the tv in, you can hear some clicking and the red timer light on the front panel turns on and stays on. When you go to press power on the set nothing happens. anyone have any ideas on a good place to start? I have messed with tv's a little bit replacing ic's and caps on a few different models for my friends/relatives, but I am stumped on where to begin on my set! Any help would be appreciated!

Powered by phpBB © 2001,2002 phpBB Group