 Posted: Tue May 19, 2009 8:59 am Post subject: |
|
| Couple of things to try
Disconnect the secondary monitor if you have one Try entering the bios when you press power button on pc by pressing F2 repeatedly until the blue bios displays if u can enter bios go to the last tab an load default settings. if your graphics card has 2 DVI / VGA sockets make sure your primary monitor is plugged into the socket ladled 1 or A( the first/primary one) next thing i would try is open up your pc and remove the graphics card try not to touch anything on the board and blow the dust off the graphics card then plug it back insecure it screw it in and plug in monitor again. erm last thing i would try is to try your graphics card in another pc if available or try an older / different card in the pc which has the problem |
|
| Posted: Mon Mar 16, 2009 1:18 am Post subject: Re: PC problem |
|||
FIRST YOU GOING TODO IS REMOVE THE CMOS BATTERY. AND UNPLUG THE AC CABLE> THEN AFTER 3-5 MINUTES TURN YOU ON YOUR COMPUTER . THE PC WILL DISPLAY THE CMOS MENU OK FIND WHAT EVER IM DENMAR : FROM: TAWI-TAWI TECHNICIANS IN BONGAO!!! |
|||
| Posted: Sat Mar 07, 2009 7:37 am Post subject: PC problem |
|
| Hi All,
This is not electronic question exactly, but can somebody tell me the solution for PC repair. Actually, my PC is switching on and monitor is working fine OK, but it is displaying nothing, even hard disk and DVD drive is also fine, even it sewems that it is not booting up. Before problem started, the display was coming distorted, but when i tested monitor on other PC its fine. can somebopdy tell me the solution. Thanks and Regards, Ashutosh Tiwari |
|