| Author |
Message |
| cookies |
 Posted: Tue Jul 17, 2007 11:38 pm Post subject: |
|
| hi i have also come across this proplem, and would like to know if you fixed it and if so how? |
|
 |
| absorbentgnome |
| Posted: Wed Jul 26, 2006 3:15 am Post subject: |
|
Similar fault 11AK19pro bush HS6671SIL
Dry joint on R606 in E/W circuit caused burn of R629 2.7ohm safety resistor. |
|
|
| Guest |
| Posted: Sat Sep 11, 2004 9:03 pm Post subject: |
|
| resolder all joints in the line output stage, check R629 (27ohms, 1/2w 90 degree tube)(2.7ohms, 1/2w 110 degree tube safety resistor to E/W FET(buk444-200A), also o/c capacitor C630 (0.47, 250volts) & its also been known for L604 to be open circuit but this chassis suffers badly from dry joints so check for them first |
|
|
| uncleBill |
| Posted: Fri Sep 03, 2004 10:53 pm Post subject: |
|
| Your east west circuit is faulty, usually due to a dry joint in the line stage, may have taken out a 2r7 safety resistor and the e-w coil. |
|
|
| EMILIO |
| Posted: Sun Aug 29, 2004 6:27 pm Post subject: BUSH CTV(Model WS6671SIL)AK19 |
|
| The picture size is reduced to almost 14in from 28 in screen.Sound, color etc are working.Any ideas on this? |
|
|