 Posted: Fri Nov 18, 2005 5:09 pm Post subject: Painter IC |
|
| To get into the service menu with the remote type 062596, then press the status button ( i think it's an " i " with a plus on it. It has to be quite quick so may take a few atempts.
To save the settings press the menu button, then press standby button to exit. Make sure you've set the right option codes, they should be on a sticker on the tube, something like 126 69 14 24 0 0 0 ( use the keypad to change values ). Charlie |
|
| Posted: Tue Nov 15, 2005 5:07 pm Post subject: Painter IC |
|
| Download the manual by typing in the model number above and select FIND NOW.
It comes in three parts so you may have to download all three before it will open. Although I haven't looked I would be very surprised if it did not contain this info. |
|
| Posted: Mon Nov 14, 2005 8:40 pm Post subject: Painter IC |
|
| Have had problems with Painter IC and have replaced complete PCB with one from another set. Now have good pics etc but need to adjust EW. Could any one tell me how to get into service mode to alter settings etc'
[email protected] |
|