| Author |
Message |
| sumdumgai |
 Posted: Sun Apr 03, 2011 2:37 pm Post subject: Removing relay cover |
|
| But is there any way to remove the plastic cover without damaging it and not removing the relay? Thanks. |
|
 |
| jts1957 |
|
|
| sumdumgai |
| Posted: Sun Apr 03, 2011 6:25 am Post subject: How do I post pictures? |
|
Thanks for pics. I'd like to post some pictures but don't see how.
[/img] |
|
|
| jts1957 |
| Posted: Sun Apr 03, 2011 2:31 am Post subject: |
|
Unless the relay is chemically sealed (Glued or ultrasonically melted) they usually have a hook that holds the top cover on opposite sides near base of relay (pix only show the hook on the left side).
 |
|
|
| sumdumgai |
| Posted: Sun Apr 03, 2011 2:05 am Post subject: Soldering? |
|
Anyway to do this without removing the relay? There are 16-18 soldered connections holding it on.
How do I upload pictures? |
|
|
| jts1957 |
| Posted: Sat Apr 02, 2011 11:07 pm Post subject: |
|
| Removing relay from the board - will then be obvious. |
|
|
| sumdumgai |
| Posted: Sat Apr 02, 2011 8:51 pm Post subject: Head block is unattached now |
|
| I removed the head block and pulled the head relay board through the front opening. Now I have access to the relay. How does the plastic cover come off so that I can clean the contacts? Thanks, |
|
|
| sumdumgai |
| Posted: Sat Apr 02, 2011 8:19 pm Post subject: Head block |
|
I've removed amp and mechanical panel, and I've located the playback relay. It's on the head relay board that's attached to the head block. Anybody know how to remove the head block?
[/img] |
|
|
| sumdumgai |
| Posted: Sat Apr 02, 2011 4:35 pm Post subject: Knob set screws |
|
| Anybody know what the size Allen wrench I need to get the knobs off? |
|
|
| sumdumgai |
| Posted: Sat Apr 02, 2011 2:56 pm Post subject: Disassembly |
|
| I've got the case off. Do I have to remove both the amp panel and the mechanical panels? Thanks. |
|
|