Sanyo dp32746 Power Supply Probem

[KJK]

When I press the power button on my Sanyo DP32746 I can hear the power relay pull in. After 10 seconds the relay drops out. During the 10 seconds the relay is in, there is no picture or sound. After attempting to power up the set 3 or 4 times the relay stops pulling in all together. If I unplug the set for a few minutes and plug it back in I can get the relay to pull in again for 10 seconds. I realize the relay is dropping out as a protective measure. Has anyone had this problem and been able to resolve it? Is there a particular module that I can replace to get the set working again?

[Guest]

Sounds like a bad power supply.