View previous topic :: View next topic |
Author |
Message |
1goodmike Guest
|
Posted: Wed Sep 03, 2008 11:49 pm Post subject: old hitachi changes channel |
|
|
I use this old 13" Hitachi TV to monitor video projects. It frequently resets itself to #2. Why is it doing this? |
|
Back to top |
|
|
torbjorn
Joined: 07 Jun 2007 Posts: 370 Location: Sweden
|
Posted: Thu Sep 04, 2008 7:51 am Post subject: |
|
|
If the channel selector uses touch buttons, then a common cause for resetting to a specific channel is dirt around the touch buttons, causing leakage currents.
Another possibility is that flashovers within the CRT or on its surface causes trouble with the touch button circuitry. Make sure that the aquadag (graphite) coating of the CRT cone as well as the CRT's mounting frame are correctly grounded, all ground wires connected and routed according to the tv's service manual, any RC networks properly connected and in good order.
If the uncoated glass areas near the mounting frame, around the EHT connector and deflection coil etc are dirty, then cleaning those can also help. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
2sa905 NO • for10h NOKIA • C-442 NAD • Panel LG Display LC840EQD-SEM1 1 [DS] . • md02 Fic • buk9524-55 2 Philips • Panel LG-Philips LCD LM150X08-TLB1 0 [DS • naamloos Samsung • 2rh48gen NOKIA • 74als234 datasheets •
|