| View previous topic :: View next topic |
| Author |
Message |
BillW
Guest
|
 Posted: Fri Jun 19, 2009 8:32 pm Post subject: Inputs |
 |
|
| Using inputs for both Video. Cable co finally connected wire back to post and appears to be working with Tuner. |
|
| Back to top |
|
 |
BillW
Guest
|
| Posted: Sat Jun 20, 2009 1:36 am Post subject: Re: Inputs |
|
|
| BillW wrote: |
| Using inputs for both Video. Cable co finally connected wire back to post and appears to be working with Tuner. |
Sorry, I wasn't very clear. The intermittent video seems to be with the video inputs. My cable company had disconnected the feed to the house while rewiring and I could not check tuner input until this afternoon. So the problem persists with the signal from the AV.
Bill |
|
| Back to top |
|
|
minnie
Joined: 18 Aug 2005
Posts: 2880
Location: Hell
|
| Posted: Sat Jun 20, 2009 3:58 am Post subject: |
|
|
| Hit the menu button on the remote if you loose the picture, it will lead you towards a signal problem or set problem. If you loose picture and press menu and it comes up its not the set. |
|
| Back to top |
|
|
BillW
Guest
|
| Posted: Sun Jun 21, 2009 1:10 am Post subject: Menu still works |
|
|
Minnie,
Tried pressing the menu button while the set was on tuner and picture stayed in background. Tried it while on the video input and still get a menu, with the black screen. Audio seems to be coming throught from DVD player without any issues. Just getting black video screen. Double checked cable to make sure that all cables hooked to correct location on both ends. Seems like something must have gone after replacing the two bad components. Is the red light supposed to remain lit after the repair? Can't see any other LED's that are blinking or going out after powering up and the Video feed side was working prior to the bad cap and fuse.
Thank you again for your input and help.
Bill |
|
| Back to top |
|
|
minnie
Joined: 18 Aug 2005
Posts: 2880
Location: Hell
|
| Posted: Sun Jun 21, 2009 6:03 am Post subject: |
|
|
| Sounds like a source issue. If menu comes up the set is working... |
|
| Back to top |
|
|
jts1957
Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away
|
| Posted: Sun Jun 21, 2009 11:05 am Post subject: |
|
|
DVD players can break. Cables can fail.  |
|
| Back to top |
|
|
Frankk
Guest
|
| Posted: Wed Jul 08, 2009 2:15 am Post subject: Hitachi 50UX52B |
|
|
| I have the issue with a set that turn on, and shuts right back off. The red protect LED flashed and originally, the 120V LED did not illuminate. I replaced E994 (it was open), and C707. Now the symptoms are the same, but the 120V LED does light up. Any suggestions? |
|
| Back to top |
|
|
Guest
|
| Posted: Wed Jul 08, 2009 4:00 am Post subject: |
|
|
I'd be replacing the convergence IC's next.
minnie |
|
| Back to top |
|
|
Frankk
Guest
|
| Posted: Wed Jul 08, 2009 11:27 pm Post subject: |
|
|
| Anonymous wrote: |
I'd be replacing the convergence IC's next.
minnie |
Thanks, do you happen to have the part numbers? Should I replace the resistors for these IC's also? Thanks! |
|
| Back to top |
|
|
jts1957
Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away
|
| Posted: Thu Jul 09, 2009 12:23 am Post subject: |
|
|
| What, you don't like surprises? |
|
| Back to top |
|
|
|
|
|
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
Poblizo.com : пътешествия -
Top free service manuals download resources 2026
Latest Service Manuals :
22sk2152 . Electronic Components Datashe • T630, T628 Sony Ericsson • PC-8 or PC/8 Comelit • hd 8753 Philips • PAD-L Series Instruction Kikusui • senso-touch-rq11-notice-utli- Philips • 17 Philips • 792 a Philips • HP-Catalog-1972 HP • 63DS-03S,70DS-03S,70DS-05S Sharp •
|
FAQ
