View previous topic :: View next topic |
Author |
Message |
ronparchita
Joined: 19 Apr 2010 Posts: 3 Location: Paris-France
|
Posted: Fri Apr 23, 2010 2:32 pm Post subject: |
|
|
Please Dodgey, can you help me
Do you have any picture of the other side of the power supply around the C 16 caps
Many many thanks to help me
I had problem soldering, power supply does'nt works, and I want to check if I burnt something around my soldering.
If no, do you have any idea where I can found pictures, I looked for and didn't find anything.
Thank you again _________________ Ronparchita |
|
Back to top |
|
|
ijrm
Joined: 21 Oct 2012 Posts: 1
|
Posted: Thu Nov 01, 2012 9:48 am Post subject: It works! Thank you all so much!!! |
|
|
In case any of you who contributed to this thread are still reading - a BIG thank you for all your input and taking the trouble to share your knowledge.
I just dismantled my Infocus Screenplay 7200 and replaced the tricky to reach behind the heat sink but very clearly marked, as C16, 16v 100uF capacitor. This cured the problem of a non functional projector that just ticked whenever turned on.
One additional tip is that to dismantle the 7200 case, remove the 4 T10 screws and then remove the back and pull the panel off the front of the handle. the top then comes away easily.
Once again, thanks for all your help. Warm glows all round! |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2880 Location: Hell
|
Posted: Sun Nov 18, 2012 3:00 am Post subject: |
|
|
Caps are polarity sensitive. Make sure you put it in the correct way. |
|
Back to top |
|
|
BK Guest
|
Posted: Thu Jun 30, 2016 12:38 pm Post subject: InFocus Screenplay 5700 Not Powering Up |
|
|
My SP5700 was working just fine but I had to box it up and left it unused for over 3 years since I had a overseas employment. Now it does not start up! No lights and none of the buttons work either on the projector or on its remote. My power cable is just fine.
I have read a bunch of discussions on the power problems with this model. Can anyone suggest/advice me on this? I'm in India at this time and I bought the projector in Houston, TX.
Thanks. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
DCR-TRV410_X SONY • service.zip R8 FOSTEX • FDS6679AZ - P-Channel PowerTrench MOSFET • [pencap radial] TH Series Teapo • UREI-1181 . Various • MAIN B Rolsen • SCHNEIDER • FM AM Stereo-clipper 3312 Nordmende • info Samsung • 4010 SGS •
|