electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
The Open Drain Output Troubles about STC12C5A

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Electronics General
View previous topic :: View next topic  
Author Message
letters



Joined: 03 May 2017
Posts: 2
Location: china

PostPosted: Wed May 03, 2017 6:26 am    Post subject: The Open Drain Output Troubles about STC12C5A Reply with quote

Good afternoon,sir
Recently I am involved in a project that controlling an analog switch--CD4066. Here the high level is required to be 12V. Actually I am planning to use the open drain output of STC12C5A( this one: http://www.kynix.com/Detail/1223087/STC12C5A08AD-35I.html ) . At the same time,the pulling up of 12V will be connected outside as well as the 10K resistance. I don’t wonder that the output of high level just be 5.8V . How to solve this problem?
PS: the only requirement is that I don’t want to use switching tube to control it.
Thanks.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Electronics General All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Електроника София - Service Manuals Free Download - Prikachi - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Search - Jabse.InK  - Pulsator

Connector Pinout Forum - Новини - SnimkiOt.com - безплатен DNS - Whois разузнаване - Poblizo.com : пътешествия