LG Plasma MZ42PZ13

[rattyfa]

Hi need some info for the power supply (main) board, either a schematic diagram or the type numbers of Q8111 and Q8110 and large bridge rectifier(on heatsink)


The pcb is labled PWB-1420 and manufactured by Powerwel Ltd

Thanks guys
[/b]

[Guest]

there are three versions of the px range, i can mail you manual ifyou id it, the version you have will have it stamped on the top of the set
i work for lg
also which factory is it made in

[rattyfa]

Thankyou very much for your reply,

I had almost given up on this set. I will find the details you require and post back to you.

From memory the power supply is a PWB1420 REV F and in the LG plasma training manual its shown as the Korean version.

Will take the set apart in the morning and try and find the other details you require, thanks again for your help.

rattyfa1970@ntlworld.co.uk

[Dagaz]

I am also looking for a schematic for a PowerWel PW-1450 Rev E.
PCB date stamp around Mar 2003.
Email eb1mail@sbcglobal.net

[Dagaz]

This link on page 8 pf the pdf, it is known as the "newer" revision
powerwel SMPS. See picture on page 8.
Dagaz

136.166.4.200/contents/Files/.../VSB2002-0005_Attachment A.pdf

[Dagaz]

Full link as noted for above.

http://136.166.4.200/contents/Files/Displays/PDP/42/P42W22/Service%20Bulletins/VSB2002-0005_Attachment%20A.pdf

[redskel]

can anyone give me an idea of what sort of voltages to expect,nothing terminated gets up above 30v vs and va but does increase to beyond 50v with plug disconnected

[redskel]

forget last message (talking thru my backside)while looking for the power supply part number(pdp42wvsn3) i found the volts on this label where if ineed one ,can i get a power supply ?

[Guest]

I am also looking for a schematic for a PowerWel PW-1450 Rev E.
PCB date stamp around Mar 2003.
Email eb1mail@sbcglobal.net

[Dagaz]

I am also looking for a schematic for a PowerWel PW-1450 Rev E.
PCB date stamp around Mar 2003.
Email eb1mail@sbcglobal.net