View previous topic :: View next topic |
Author |
Message |
Guest
|
Posted: Sun Feb 05, 2006 10:43 am Post subject: Automatic control and display of Room temperature |
|
|
hello every one and i hope they all ok could u help me
A temperature sensor is to be interfaced with a PC and an output signal is to control the flow of hot air into the room. A high level language
could i use by this way , by use PIC 16F877 and i thing this chip because there is A/D (analog to digital)convertor.and the PIC 16F877 it will read the temperature from temp sensor LM35 , i thing this LM35 because it's more sensitive to tempreture and the output is constant 10mv/1c and it's linear , then it will convertor to digital then send to PC by serial port.
now the problem i do't know how to do the program in a high level language?
is this my way right. and how to do the program?
thank you very much
best regards |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
230W Sunny • CP-776 STR-F6654 SDA545XOPT TDA8133 TDA • KCA21T22W LG • KA-4006 Kenwood • 2sa1162 HT Semiconductor • chassis cp-530ft-vt cp-530-f model dux-2 • EVOi 324 JBL • sony bdv-e780w w980w e985w panasonic • VR-705SA & 707A & 716A Kenwood • Схема DRA-565RD & DRA-365RD DENON •
|