| View previous topic :: View next topic |
| Author |
Message |
bat.21
Joined: 23 Feb 2015
Posts: 3
Location: United Kingdom
|
 Posted: Mon Feb 23, 2015 7:09 pm Post subject: Sharp R84-ST Combi Microwave - Not Heating (microwave) |
 |
|
Food's not getting hot. Light Works, turntable works. Taken case off and checked the 2 internal fuses. Main 1¼" fuse is ok. 20mm, 8 Amp fuse had gone. Changed it twice, blew straight away, both times. It it the Magnetron, or is there anything else I can try?
Thanks |
|
| Back to top |
|
 |
jts1957
Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away
|
| Posted: Mon Feb 23, 2015 8:52 pm Post subject: |
|
|
I presume it only blows during microwave operation?
I also presume the first fuse is the ceramic 15 - 20 amp located live side of AC line cord circuit?
Where is 20mm fuse located physically, and if you know electrically?
Unplug either primary winding lead of Power (HV) transformer. If still blows fuse - Is NOT due to any HV component including magnetron.
_________________
You're over there, I'm over here. |
|
| Back to top |
|
|
bat.21
Joined: 23 Feb 2015
Posts: 3
Location: United Kingdom
|
| Posted: Mon Feb 23, 2015 9:22 pm Post subject: |
|
|
| It's on the same board as the one you mention, and blows as soon as you press the start button to use the microwave function. I'll try what you suggest. |
|
| Back to top |
|
|
jts1957
Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away
|
| Posted: Mon Feb 23, 2015 9:38 pm Post subject: |
|
|
Did not realize I had mentioned ANY board.
_________________
You're over there, I'm over here. |
|
| Back to top |
|
|
bat.21
Joined: 23 Feb 2015
Posts: 3
Location: United Kingdom
|
| Posted: Wed Feb 25, 2015 12:55 pm Post subject: |
|
|
| sorry, you didnt, but both fuses are on a small circuit board where the incoming mains connects to. |
|
| Back to top |
|
|
|
|
|
FAQ
