Matsui TV - sound defaults to full - help!

chrisauk · Joined: 24 Jul 2006 Posts: 5

Hi all, really hope someone an help with this.

I have a Matsui TV - Model 25N10. The remote for this TV is broken and has now been discarded. I have found a site that does a replacement, but before I order I have another issue that is apparently connected. Basically, when I turn my TV on the volume is defaulting to full. This causes panic as you frantically try to turn the volume down!!

I have been told that this is quite possibly a setting on the remote? It was suggested that by messing around with universal remotes (which I have been doing) then I may have reset the volume default?

Anyone have any ideas on this at all? Maybe there is a service code I can enter to reset the box to its factory default?
----

gary · Joined: 05 Apr 2005 Posts: 550 Location: MANCHESTER, uk

you will need a remote, set volume to required level in menu and store as "PP".

chrisauk · Joined: 24 Jul 2006 Posts: 5

Thanks for that Gary. I do have a remote but please can you describe how I

a) set the level in a menu? and
B) Store as PP?

gary · Joined: 05 Apr 2005 Posts: 550 Location: MANCHESTER, uk

instruction book can be downloaded from his link http://www.partmaster.co.uk/cgi-bin/downloads.pl?brand=Instruction+Manuals&criteria=25n10

chrisauk · Joined: 24 Jul 2006 Posts: 5

Already got that. Its a standard instruction book. No help with the issue at all. Neutral

gary · Joined: 05 Apr 2005 Posts: 550 Location: MANCHESTER, uk

IF THE PROCEDURE ON PAGE 5 OF THE MANUAL DOES NOT WORK THE EEPROM WILL HAVE TO BE REPLACED AND ALL THE SETTINGS RESET INCLUDING SERVICE ALIGNMENTS

chrisauk · Joined: 24 Jul 2006 Posts: 5

gary · Joined: 05 Apr 2005 Posts: 550 Location: MANCHESTER, uk

wouldnt touch it, very poor quality set, the time involved and reliability afterwards couldn't be justified.

chrisauk · Joined: 24 Jul 2006 Posts: 5

Can you offer part exchange?