SHARP 32LF92

[shem]

Can anyone help with the settings for AK45 CHASSIS PRODUCTION SERVICE MODE ADJUSTMENTS its a 32" i have some settings for a 28 inch chassis but its not quite right i just need to set up the geometry

[stevestar999]

Sharp 32F641 but this might work on other SHARP tvs too.


WARNING--EVERYTHING I HAVE READ SAYS YOU CAN DAMAGE YOUR TV SCREWING AROUND IN THIS MENU...copy down your original settings and don't change anything unless you know what you are doing.

(USE BUTTONS ON TV, NOT REMOTE TO ENTER SERVICE MODE)

1. Unplug your SHARP TV
2. Push the power button to drain any power left in TV
3. Hold down the VOL DOWN and CHANNEL UP at the same time
4. Keep holding the buttons down
5. Plug in the TV
6. Wait for about 5 seconds
7. The TV will turn itself on
8. Release buttons
9. Some message will be displayed on the screen
10. The TV will return to normal mode once you turn the TV off