View previous topic :: View next topic |
Author |
Message |
vdklok Guest
|
Posted: Thu Sep 13, 2007 5:27 pm Post subject: 56" RCA Projection blowing fuse black as soon as plugge |
|
|
56" RCA HDTV rear projection. TV is 3 years old. As soon as I plug it into the wall, the fuse blows black. Unplugged wiring on the front board where power plug is connected and fuse didn't blow. So the problem lies somewhere after that first board.
Any ideas where to start looking? |
|
Back to top |
|
|
Guest
|
Posted: Thu Sep 13, 2007 11:07 pm Post subject: |
|
|
check the value of the fuse, it is engraved on the board,and why you need to unplug from the wall? just get a new fuse and use the front buttom to power on and off or the remote, instead of to unpug and plug the cord,some times when you fit the plug in the outet it kinda makes a short and spark and if the fuse is old or not same factory oem,can cause it to blow. |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2880 Location: Hell
|
Posted: Thu Sep 13, 2007 11:37 pm Post subject: |
|
|
You didn't put a model, put a new fuse in and unplug the convergence board and plug it in. If the fuse doesn't blow your convergence power supply needs to be fixed. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
21NI60 02 Erisson • FT-7B Schematic YAESU • Panel CMO N173O6-L01 0 [DS] . Various • GLP23A TX-26LE8F TX-26LE8FS TX-26LE8L TX • 2sb1192 Inchange Semiconductor • E3633A and E3634A DC Power Supplies Serv • 2sa940 LGE • 2sa1263 Toshiba • KCD-139 Kenwood Radio CD • Installing-Heat-Shield-2 apple •
|