View previous topic :: View next topic |
Author |
Message |
joseafonso88
Joined: 27 Oct 2007 Posts: 2
|
Posted: Fri Nov 02, 2007 4:49 pm Post subject: Amplifier 120W RMS |
|
|
I made an amplifier of 120W RMS but need help to the power supply...
My amplifier is: www.amplificador120rms.blogspot.com |
|
Back to top |
|
|
Pentode
Joined: 30 Oct 2007 Posts: 85 Location: Nr. Manchester (UK)
|
Posted: Mon Nov 12, 2007 1:06 am Post subject: |
|
|
A single TDA2052 is only rated at 40 Watts RMS into a 4 ohm load and 60 Watts music power, the recommended supply voltage is 22 volts + & -
This is easily achieved by using a centre tapped transformer, connecting a bridge rectifier to the out most ends of the secondary and taking the center tap of the secondary to the 0V or earth, this is the economical way of doing it.
This would call for 15-0-15 V secondary or one with two separate 15V windings. There are other configurations depending on the transformer. This will give you 30 x 1.414 = 42 total and 21v + & - because of the center tapped ground.
A 16-0-16V type would equally work but with this you are approaching the maximum DC supply limit of the device.
Davy |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
DiamondMax 22 SATA II maxtor • toshiba d-vr7kc sm TOSHIBA • 2MD-001 Kyocera • LeXfiles SXFun6in1v1.2 Aug2004 Philips • AVR3801 Denon • R3265A R3271A Spectrum Analyzer Vol II S • AXIAL TAPING, Cut Lead & Lead Forming an • pdtc144e series Philips • General EP4000 096 Minolta • LC7.2E LA LCD TV.part06 Philips •
|