View previous topic :: View next topic |
Author |
Message |
joseafonso88
Joined: 27 Oct 2007 Posts: 2
|
Posted: Fri Nov 02, 2007 4:49 pm Post subject: Amplifier 120W RMS |
|
|
I made an amplifier of 120W RMS but need help to the power supply...
My amplifier is: www.amplificador120rms.blogspot.com |
|
Back to top |
|
|
Pentode
Joined: 30 Oct 2007 Posts: 85 Location: Nr. Manchester (UK)
|
Posted: Mon Nov 12, 2007 1:06 am Post subject: |
|
|
A single TDA2052 is only rated at 40 Watts RMS into a 4 ohm load and 60 Watts music power, the recommended supply voltage is 22 volts + & -
This is easily achieved by using a centre tapped transformer, connecting a bridge rectifier to the out most ends of the secondary and taking the center tap of the secondary to the 0V or earth, this is the economical way of doing it.
This would call for 15-0-15 V secondary or one with two separate 15V windings. There are other configurations depending on the transformer. This will give you 30 x 1.414 = 42 total and 21v + & - because of the center tapped ground.
A 16-0-16V type would equally work but with this you are approaching the maximum DC supply limit of the device.
Davy |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
230W Sunny • CP-776 STR-F6654 SDA545XOPT TDA8133 TDA • KCA21T22W LG • KA-4006 Kenwood • 2sa1162 HT Semiconductor • chassis cp-530ft-vt cp-530-f model dux-2 • EVOi 324 JBL • sony bdv-e780w w980w e985w panasonic • VR-705SA & 707A & 716A Kenwood • Схема DRA-565RD & DRA-365RD DENON •
|