PANASONIC TV CT-32G11CU DEAD

PULSAR GTR · Joined: 20 Dec 2006 Posts: 4

Hi All.

I have a 32" Panasonic TV model CT-32G11CU, which doesn't turn on, once I press the power button I can hear the relay click but no video or Audio. I have visually inspect the circuit board and I did not see any cracked or cold solder any where.
Fuse is good, just now sure if the flyback will cause such a problem hence I need the schematic to track the power.

If any one knows what is causing this problem, please let me know, also if any one have the schematic diagram for it, please email it to me at [email protected]

Thank you,

Rafi

minnie · Joined: 18 Aug 2005 Posts: 2880 Location: Hell

It's usually IC 801 pukes. It's the main regulator.

PULSAR GTR · Joined: 20 Dec 2006 Posts: 4

Hi minnie,

Thank you for the quick reply, I will look into IC801, on the other hand, does any one have a schematic for this tv or the section where IC801 is in order for me to troubleshoot it? If not, I will call my local TV parts store to see if they sell these schematics.

Cheers,

Rafi

PULSAR GTR · Joined: 20 Dec 2006 Posts: 4

I just bought the schematic online from http://www.servicemanuals.net

I have a softcopy of it incase any one needs it.

Cheers,

Rafi