View previous topic :: View next topic |
Author |
Message |
irobot
Joined: 13 Mar 2009 Posts: 49
|
Posted: Tue Apr 06, 2010 8:10 am Post subject: YAMAHA RX-V2500 PA Problem |
|
|
Hi All
I hope someone can help with this:
I have a RX-V2500 on the bench with what I believe to be a strange bias problem on the SL channel output stage. DIAG mode displays DC Protect fault.
So here's the scoop -
Upon power up I read about -1.5V on the speaker output, which climbs to about -3.1V volts after about 20 seconds, then of course the DC protect kicks in and shuts it down.
I see this same -1.5V ~ -3.0V on the input to the PA (this is the "VSL" signal). It also too slowly climbs up to about -3.0.
The same voltages (-1.5V ~ -3.5V) show up on both emitters of the complementary transistor pair prior to the finals.
I replaced almost every component in the bias and output stage including the finals and .22Ohm pair. I checked for any possible floating grounds.
I also checked and rechecked components on the preamp/driver board.
The other channels are all fine.
By now I'm pulling my hair out!
Any ideas?
Thanks! |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
2sd1656 . Electronic Components Datashee • tecra 9000 TOSHIBA • 5991-2646EN Simplifying Multi-Channel Me • lc 27u6 u serial 422 . Various • 107b ch CM24 GSIII[1].part1 Philips • blf6g15l-40brn . Electronic Components D • hfe aiwa csd-el300 service en AIWA • CUC-2021 Grundig • MA-99400-00 System90 Model 25 Hardware I • tv philips 14gl1015 14gl1316 20gl1045 20 •
|