JVC VCR eject problems

Guest · Posted: Sun Jan 13, 2008 5:25 pm Post subject: JVC VCR eject problems

HI
I have a JVC HR-s9800u
The eject motor keeps running for 10 seconds after the tape ejects. Then the unit shuts down. I really want to fix this thing, as its a nice unit.

Thanks in advance.

pawluf · Joined: 10 Jan 2008 Posts: 18 Location: Malta G.C.

I haven't the manual for your particular set. Be it could easyly be a widened belt.
_________________
Pawluf
Malta G.C.

Justmanuals · Joined: 21 Aug 2004 Posts: 1453

This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com

Paul@justmanuals.com
_________________
Want To Fix Something?
http://www.manuals4you.com

Need a manual now? Instant Download
http://www.justmanuals.com

Guest · Posted: Sun Jan 13, 2008 8:26 pm Post subject:

Are you refering to the load motor belt?

Thanks

pawluf · Joined: 10 Jan 2008 Posts: 18 Location: Malta G.C.

Yes, a set of belts can be bought quite cheaply.
_________________
Pawluf
Malta G.C.

Guest · Posted: Sun Jan 13, 2008 10:07 pm Post subject:

hi
Do you know what determines when the motor should stop? Is it the mode switch or is there a switch or sensor...?

Thanks

pawluf · Joined: 10 Jan 2008 Posts: 18 Location: Malta G.C.

Unless it is a very old model it will be the mode switch. Otherwise a visable leaf switch at the top of the deck.
_________________
Pawluf
Malta G.C.

Guest · Posted: Mon Jan 14, 2008 12:43 am Post subject:

found it....
cracked solder joint on the side phototransistor.

Thanks again for your help...

pawluf · Joined: 10 Jan 2008 Posts: 18 Location: Malta G.C.

Good. We would have come to that.
_________________
Pawluf
Malta G.C.