View previous topic :: View next topic |
Author |
Message |
xlouk
Joined: 26 May 2004 Posts: 1
|
Posted: Tue Jun 03, 2008 10:40 am Post subject: Philips mg2.1e chassis low brightness , no blue raster |
|
|
I have a Philips mg2.1e chassis which has low brightness and it hasn't got blue raster.
Please can anybody help me. |
|
Back to top |
|
|
torbjorn
Joined: 07 Jun 2007 Posts: 370 Location: Sweden
|
Posted: Tue Jun 03, 2008 12:10 pm Post subject: |
|
|
Check that all three CRT heaters are glowing normally.
Also, check the drive to the CRT cathodes by a scope. If the drive signals are normal (both p-p value and dc level, no black clipping etc), then the CRT is probably faulty. Of course, you could try turning up the screen voltage to see if you get better brightness. |
|
Back to top |
|
|
Guest
|
Posted: Fri Jun 06, 2008 7:16 am Post subject: |
|
|
torbjorn wrote: | Check that all three CRT heaters are glowing normally.
Also, check the drive to the CRT cathodes by a scope. If the drive signals are normal (both p-p value and dc level, no black clipping etc), then the CRT is probably faulty. Of course, you could try turning up the screen voltage to see if you get better brightness. |
I Checked all this below and everything works ok.
Have you got any other idea.
Thanks. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
fdms8670s Fairchild Semiconductor • s a 18 panasonic • 15mm itautec • 04-TI-005 panasonic • KSC [radial non-polar] NM Series KSC [Ki • CTM511 teac • [radial thru-hole] KLH Series Koshin • 2sd1716 Inchange Semiconductor • ixta2n100 ixtp2n100 Ixys • pm3244 mods Philips •
|