Magnavox b/w ccd security camera 98mc355r cable pinout

[rgoodpa]

I need to determine what wires are for what purpose in the "system cables" of three magnavox ccd security cams, with audio. (model #98mc355r, circa 1997) They have a rj-11 E connector that provides power and returns the video and audio signal.

They run on 9.6-24v DC. Since there are two twisted pairs in the cable, I assume that one is for power and one carries the A/V signal, but I have no idea how to tell which is which or how to tune in the signal. Can I just wire it to my tv antenna? If so, is it UHF or VHF, and what channel?

I am hoping that it does not use some proprietary signal format. Anybody have any experience with this sort of thing? I tried unsucessfully to get information out of Philips/Magnavox but they apparently don't support these any more .

Thnanks a bunch in advance

[rayabadi]

please let me know if you got your answer because i have the same quetion .please .... is geen red wire for adio vedeo or power

thanks

[Guest]

Wat is the spec of the camera?
I assume the rj11 plug goes into the camera. What is on the other end and colours of wires?
What type of camera i.e dome, bullet etc?
The signal outputs will be composite video for connection to a.v input of a vcr, t.v, dvd recorder or even a cctv card in a p.c, dedicated switcher unit for switching between cameras automatically with adjustable timming (the p.c card can do this also).
Most cctv cameras have a special plug at the camera end i.e the rj11 and at the other end will have (maybe via an adapter) phono plugs for audio and video while the power would have a d.c socket for connecting the supply.

[RonsDesk@ec.rr.com]