View previous topic :: View next topic |
Author |
Message |
johnorama Guest
|
Posted: Tue May 26, 2009 12:29 am Post subject: GE A1050 Digital Camera - Need schematic |
|
|
I am looking for a schematic for the GE WM1050 or A1050 Digitial camera. The WM1050 is the one marketed to WalMart (I believe). Specifically, I am looking for info to better understand how the 2 position Focus/Shutter soft-puch-button works. I am looking to replace it with remote controlled switches for an arial photo project.
The switch is labeled SW1 on the board and appears to have 6 solder points (looking from the top). 2 of the solder points may be to anchor the button only. Initial readings show 2 of the other solder points reading approx .5 ohms when open and 0 ohms when button is at first detent and second 2 joints show approx. 5 ohms until the button reaches the second detent at which it then goes to 0 ohms. I assume in both cases the meter is reading other connected circuitry when switches are open.
I think it is a straight forward switch, but I want to be sure since I dont think I could get it back together after I desolder in attempt to connect other switches.
Any information would be appreciated. And if you live in my area I will take arial photos of your house or place of choice!
John
DFW area. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
PC800A & 1200A InterM • Схема POA-1500 DENON • HP COMPAQ PRESARIO CQ50 - WISTRON ASTROS • fdp8n50nzu fdpf8n50nzu Fairchild Semicon • Pye Q70 PYE (GB) • 2520 903 01B Keithley • AES-80 Assembler aes • PowerMac 7100 Apple • BX998A Philips • ME33 Boss •
|