electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Sony Plasma
Goto page 1, 2, 3  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
jon R
Guest





PostPosted: Wed Aug 05, 2009 4:35 pm    Post subject: Sony Plasma Reply with quote

Hi all, my first post here.

I have a faulty Sony Plasma TV and was wondering if it is safe to disconnect the sustain pcbs and then power it up so i can carry out V checks?

I have looked at another plasma before and unplugged the Xsus board, plugged it in and the psu melted. I wonder whether it was just coincidence!

I knw i havent posted any details re the tv (model etc), but thought I would see what i can gain from the checks first

Many thx
Jon
Back to top
Guest






PostPosted: Wed Aug 05, 2009 6:25 pm    Post subject: Reply with quote

How about following the procedures in the service manual for your specific model.
Back to top
Justmanuals



Joined: 21 Aug 2004
Posts: 1948

PostPosted: Wed Aug 05, 2009 7:00 pm    Post subject: Reply with quote

This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com


[email protected]
_________________
Want To Fix Something?
http://www.manuals4you.com

Need a manual now? Instant Download
http://www.justmanuals.com
Back to top
View user's profile Send private message Send e-mail
jon R
Guest





PostPosted: Wed Aug 05, 2009 9:05 pm    Post subject: Reply with quote

As far as i was aware there wasn't a REAL service manual for this Plasma!

Anyway, I exchanged the 4 bulging caps on this Plasma
(model = KE-42TS2/E)

4x 2200uf caps on the psu. I heard it was a common fault on these (as there are repair kits available consisting of these 4 caps ). No joy, but they needed changing anyway.

I suspect the Ysus board, but I am struggling with the main fan. I was told it was temp controlled but someone on another forum said it comes on straight away, mine doesn't (no V+). I did short out the fan return to gnd in case it was sensing a low speed.

Anyway, not sure if that is the problem.

anyone have any thought about the fan control?
Or anything else?

Many thx
Back to top
Guest






PostPosted: Thu Aug 06, 2009 4:41 am    Post subject: Reply with quote

You better use an isolation transformer when you test it under power or you may get a nice shock.
Back to top
anyhow



Joined: 28 Jul 2009
Posts: 21

PostPosted: Thu Aug 06, 2009 5:19 am    Post subject: Reply with quote

Here is the US version of the service manual KE-42TS2U:

http://www.eserviceinfo.com/downloadsm/43193/SONY_KE-42TS2U.html
Back to top
View user's profile Send private message
jon R
Guest





PostPosted: Thu Aug 06, 2009 10:34 am    Post subject: Reply with quote

many thx anyhow for the link, checking it out now
Back to top
jon R
Guest





PostPosted: Thu Aug 06, 2009 10:53 am    Post subject: Reply with quote

jon R wrote:
many thx anyhow for the link, checking it out now


what a strange service manual, nothing at all mentioned re the sustain boards OR psu (switching regulator).
I have seen a few manuals in my time (although not many plasma sm), but not one where all the main circuits are missing.

Back to square one i'm afraid.


thx anyway
Back to top
jon R
Guest





PostPosted: Thu Aug 06, 2009 10:57 am    Post subject: Reply with quote

oops forgot to mention....... the fan isn't the problem, it has a delayed start
Back to top
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Fri Aug 07, 2009 2:50 am    Post subject: Reply with quote

Posting the model and what it's doing or not doing is a good start.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page 1, 2, 3  Next
Page 1 of 3

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия