View previous topic :: View next topic |
Author |
Message |
topsal
Joined: 08 Aug 2009 Posts: 5 Location: florida
|
Posted: Wed Aug 12, 2009 3:21 am Post subject: Convergence diagnosis problem |
|
|
How can I tell if the Convergence IC is bad or if its the Vertical IC?? It just clicks and doesnt show a picture at all. all LEDS on board on including red. power LED light in front on as well.....??? |
|
Back to top |
|
|
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Wed Aug 12, 2009 7:39 am Post subject: |
|
|
On your: ______ __" ______, or what
On your: ( brand) (size) (Model #) |
|
Back to top |
|
|
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Wed Aug 12, 2009 7:42 am Post subject: |
|
|
A "Hitachi 60fx20b chassis HP11 projection tv" perhaps? |
|
Back to top |
|
|
topsal
Joined: 08 Aug 2009 Posts: 5 Location: florida
|
Posted: Wed Aug 12, 2009 8:39 am Post subject: |
|
|
Sorry lack of info yes. Hitachi 60 in 60fx20b chassis hp11. The tv will turn on and you here a click on board. But no picture or sound. All of the green lights on the board are on including the red one. Some times it just clicks on and off right away. If you unplug it it will come on but nothing. the red light on the front comes on as well. Any help, suggestions would be great. And possibly a repair manual for this model as well would be greatly appreciated. any help would be awsome and greatly appreciated. |
|
Back to top |
|
|
plcnut
Joined: 18 Aug 2009 Posts: 6 Location: Missouri, U.S.A.
|
Posted: Wed Aug 19, 2009 5:37 am Post subject: |
|
|
replace the vertical and the convergence IC's while your at it. I buy mine from http://encompassparts.com/ . Regards, Jason |
|
Back to top |
|
|
minnie
Joined: 18 Aug 2005 Posts: 2880 Location: Hell
|
Posted: Thu Sep 03, 2009 11:31 pm Post subject: |
|
|
Given the age I'd suspect convergence IC's. I've been fooled by the vertical IC also... |
|
Back to top |
|
|
|
|