NEC Multisync FP950 or FP1350 schematic needed

[mike]

After some sparks (I heard), the image has gone, now just the front led is on
Where can I find the schematic for this monitor?

PS: I've checked the FET that drives the high voltage inductor (for horizontal screen lines) and it seems to be ok, althouh it only has about 70V at input, don't know if it's normal or is it too low?...

Without the schematic I don't dare changing the inductor wihtout being shure, it must be expensive I guess

Any comments are welcome, many thanks.

mike.silva(at)softhome.net