aoc 5en problem

[icepb2006]

greetings!!!


i am repairing a 15" AOC monitor, model: 5en, black chassis. Its first


symptoms was a ticking sound with no other action. I found a shorted
MOSFET transistor (IRF634B) in the secondary side of the low voltage
PSU. Tested other components in the PSU but they are ok. After
replacing the transistor, it now turns on but the display becomes too
big and it comes on and off accompanied by a clicking sound. I observed


that its the high voltage that comes on and off. Then after that cycle,


there's no raster anymore. But the frontpanel light is on and the
control for screen adjustments responds when pressed. Can anyone give
me suggestions on how to fix the problem?


an additional info to my previous post: after replacing the transistor.


it stopped ticking. i measured the b+ voltage (i based the voltage read


on a good monitor) and its seems ok.
i connect the video cable to the video card, it attempts to display the


information but resulted to whining on/off and blinking of power led
(green color).Then i noticed the high voltage come & go. i measured the


voltage during this phase. it rises and falls back to 90v.
what am i missing? i think the problem only arises when it recieves
signal from the video card. replies would be very much appreciated.


thanks in advance,


regards,


ian b