Need help with Philips/Magnavox 9P6444C103 TV

[unlucky58]

The chassis number is PTV840. Capacitor 2442 (270uF) shorted in the 130 v supply. This caused coil 5415 (1.8uh) to burn. I replaced both the capacitor and coil as well as diode 6419. Because of flame damage I replaced diode 6417 and capacitor 2444. Fuse 1405 was blown and replaced. I then found that resistor 3415 (15 ohm) was open. I replaced it as well as IC 7411. Diode 6402 (BYV95C) is broke into 2 pieces. After replacing everything except diode 6402 the power LED now lights but there is no 130 v supply. Does anyone have any suggestions what to check next? Also I can't find diode BYV95C; will a 1N4937 work? Thanks in advance.

[jts1957]

Had NO trouble finding:
http://cgi.ebay.com/BYV95C-Diode-x-1-BYV95_W0QQitemZ380175017549QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item588432664d
_________________
You're over there, I'm over here.

[unlucky58]

Thanks. I did do a search on ebay and only found the diode from Europe. Don't know why I didn't find the link you sent.

[jts1957]

Sounds near enough to Europe to me, but the do ship Worldwide.
Nice of them to list "usa" in their seller name and currency in dollars.

Item location: New Malden, Surrey, United Kingdom
Ships to: Worldwide
Payments: PayPal
_________________
You're over there, I'm over here.