B&K AVR-507 service manual needed

wizbangdoodle · Joined: 03 May 2010 Posts: 1

I have a B&K AVR-507 that will not power up. Turn on power and the output relays click on then off and it goes into sleep mode. I think it is just in a self protect mode. All my voltages seem to be there, but I don't have a schematic to confirm this. If anyone has a schematic I would really appreciate it. Thanks for any help you can give.

Guest · Posted: Wed Aug 18, 2010 1:25 pm Post subject:

That's what's SUPPOSED to happen when you power this unit on! Initially it goes into sleep mode (most people leave it in this mode when not in use). You need to then power it on (AGAIN) using the remote!

If there was a problem when powering on from sleep mode, you would notice an "error" display on the front panel and/or monitor connected to unit!

J