CK 7271 WP Z70 chassis

[porky19]

Hello,

I have the following information:
SAMSUNG chassis Z70 CK-6271WP CK-7271WP processor SIM 131-1 C69532Y, CS-21K3ST.
To enter service mode need to turn on the TV is operating,
then click the button panel in the following sequence:
"STAND BY" "MUTE" "1" "8" "2" "POWER ON". Exodus - "POWER OFF".

The "STAND BY" is the power button, or it is a real button on original remote controller?
Becouse i have "remanufactured original" RC for Ck 7271.


Brg,:
Kovacs

[jts1957]

# Turn on the TV on and select the input that you want to adjust.
# Turn the display off.

# In quick sequence on the remote press:
{MUTE} {1} {8} {2} {POWER} buttons.

# The TV will turn On with the Service Menu displayed.
ADJUSTMENT - TEST PATTERN - SET OPTION BYTE - FACTORY RESET

# Select the function and use the {VOL+} button to enter.
# Save settings and exit by pushing {MUTE} twice then {POWER}.
_________________
You're over there, I'm over here.