TV SAMSUNG CK 7271 WP Z70

[porky19]

Hello,

I have the following information:
SAMSUNG chassis Z70 CK-6271WP CK-7271WP processor SIM 131-1 C69532Y, CS-21K3ST.
To enter service mode need to turn on the TV is operating,
then click the button panel in the following sequence:
"STAND BY" "MUTE" "1" "8" "2" "POWER ON". Exodus - "POWER OFF".

Is the "STAND BY" the power button, or it is a real button on original remote controller?
Becouse i have "remanufactured original" RC for Ck 7271.


Brg,:
Kovacs

[jts1957]

Once again...

# Turn on the TV on and select the input that you want to adjust.
# Turn the display off.

# In quick sequence on the remote press:
{MUTE} {1} {8} {2} {POWER} buttons.

# The TV will turn On with the Service Menu displayed.
ADJUSTMENT - TEST PATTERN - SET OPTION BYTE - FACTORY RESET

# Select the function and use the {VOL+} button to enter.
# Save settings and exit by pushing {MUTE} twice then {POWER}.
_________________
You're over there, I'm over here.

[porky19]

Thank you!
But this is a really interesting combination, becouse the fact, that pressing any numeric key the TV will ON, so when we press power button the TV will OFF.
May the original Samsung RC doesn't start TV, when pressing any numeric key?
#mute this is ok
#1 at this point, the TV is ON
#8
#2
#POWER and finally the TV is OFF!