View previous topic :: View next topic |
Author |
Message |
Peter D Guest
|
Posted: Sun Feb 26, 2012 2:00 pm Post subject: Heaters |
|
|
I havea mitsibushi CT14MS1BM TV in pieces due to the heaters repeated going off at random The line scan it operating and EHT and other line outputs remain working. The tube and all connections are fine but no voltage appears at the heater connections on the flyback line transformer.
The winding has a low reistance and when operating provides 1.745 volts. When it stops you can see the picture slowly fade away all at normal scan and size. Any Ideas welcome. Regards Peter |
|
Back to top |
|
|
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Sun Feb 26, 2012 8:18 pm Post subject: |
|
|
If you have a CRT tester, try running the tube and see if filaments remain on. If so, you have a bad connection somewhere between the CRT pins and the flyback pins. Try reflowing all solder joints along this path. _________________ You're over there, I'm over here. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
29B30 SVA • 55PUF6132 Philips • cb3 jack panasonic • rt 2009 • bux48 Inchange Semiconductor • HABANA-C NP R45K002 Samsung • AM502 Oct86 Tektronix • bb050102 panasonic • KRC28 Kenwood • LC-22HU56 . Various •
|