Magnavox projection tv model #6p5451c102: Picture distorted

[bstorm]

Bought this particular tv from a thrift store and was changing out the cooling fluid in the green lens when a little spilled out on to the large signal board. After this the picture flickers and is distorted on the top 3 inches of the screen. Can see resistors r403 and 404 are burned/ damaged. Desperately need help

[[email protected]]

I bought this particular projection tv from a thrift store thinking that it would be an easy lens cleaning and fluid change. When I first took the lens out, a little cooling fluid leaked onto the large signal board. I wiped it down, replaced the fluid in the lens and put the thing back together. After that I noticed that the resistors at r403 and r404 are burned. Could this have been caused by the cooling fluid leaking onto the circuit board? I've also noticed that the picture on the screen is bowed down on the top of the display and I can't quite get the colors line up right. What parts should I replace and where can I get them? Thanks for the help to whoever can respond. Please write back to my email: [email protected]


Bryan from Washington State [/url]