Author |
Message |
minnie |
Posted: Mon Jul 07, 2008 10:39 pm Post subject: |
|
This is what sucks with plasmas. Put the original boards back in and see if ant thing changes. |
|
 |
ironworker28 |
Posted: Mon Jul 07, 2008 7:08 pm Post subject: |
|
well i put a new ysus board and a new zsus board in and still the same thing, when i turn it on i get a few weird colors here and there, than once it warms a min and its suppose to be a picture, it flashes bright yellow and white messed up snow for a sec than goes black and sound comes on fine????? Im about to toss this thing in a dumpster  |
|
 |
minnie |
Posted: Tue Jul 01, 2008 10:54 pm Post subject: |
|
ironworker28 wrote: |
i found that the wiring harness coming out of the ysus board has no power where it should. i think thats my problem, any input? |
Bad ysustain board. |
|
 |
ironworker28 |
Posted: Tue Jul 01, 2008 9:53 pm Post subject: |
|
i found that the wiring harness coming out of the ysus board has no power where it should. i think thats my problem, any input? |
|
 |
Guest |
Posted: Mon May 12, 2008 11:08 pm Post subject: |
|
Put the original board back in and Short pins 1 and 2 on the logic board. It will display an internal pattern as long as the pins are shorted. |
|
 |
ironworker28 |
Posted: Mon May 12, 2008 8:32 pm Post subject: |
|
I checked them when i installed it. At first i didnt have one of the ribbons that go to the screen seated properly, so i fixed it and check all connectors again. How do i test the board? Thats where i need to start. Im sure there is a couple of pins i can check voltage on or something to see if it is good?? Thanks |
|
 |
minnie |
Posted: Mon May 12, 2008 7:43 pm Post subject: |
|
Check all of your connectors. Sounds like one may be loose or they sent you a bad board. Toshiba's notorious for new and defective boards. |
|
 |
ironworker28 |
Posted: Sat May 10, 2008 9:49 pm Post subject: HELP! |
|
Please someone chime in and help me make a decision! Thanks...  |
|
 |
ironworker28 |
Posted: Wed May 07, 2008 9:10 pm Post subject: help |
|
Well i installed the z_sus board and i get dif color flashes, bold white lines on a black screen. Different than with the other board. ??? I dont know how to test these to know what is wrong im just doing the trial and error thing. Can anyone help me? Also from the back when the tv is on it sounds like it did when it was good. After it blew it made a dif buzzing humming noise. Sounds right just still dont have a pic, just sound??? |
|
 |
ironworker28 |
Posted: Tue May 06, 2008 2:44 pm Post subject: |
|
well i ordered the zsus board, it was $150 shipped brand new. I also found the ysus board @ $180 shipped new. Ill try Z first. Im hoping this works. i love the TV and cant wait to get her up and running again. Ill post again after i try the z board. |
|
 |