Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs

Post a reply
Username
Subject
Message body Emoticons View more Emoticons	Font colour: Default Dark Red Red Orange Brown Yellow Green Olive Cyan Blue Dark Blue Indigo Violet White Black  Font size: Tiny Small Normal Large Huge Close Tags [quote="jts1957"][quote="ronw_57"]Hook up was with composite cables to get high def picture.[/quote] [b]Composite cables (S-Video or Yellow plus White & Red) will NOT get you high def picture.[/b] from the User Manual: DVI-HDTV Input Lets you connect an HD receiver with a DVI output. • DVI (Digital Visual Interface) Provides an uncompressed, digital video interface developed for high-bandwidth digital connection. It supports the overlay of high-resolution graphics needed by some electronic program guide navigation and other interactive services. DVl, when combined with HDCP (High bandwidth Digital Content Protection) technology, creates a protected digital connection. The signal speed of the DVl connection is 1080i for HDIV at a rate of 1.78 Gigabits per second. • L/MONO (Audio) Provides left audio connection when using the DVl jack. The left audio connector is usually white. • R (Audio) Provides right audio connection when using the DVl jack. The right audio connector is usually red. Note. Remember to connect the left and right audio cables because the DVl cable carries only the picture signal, not the sound. COMPONENT INPUTS Lets you connect a component video source, such as a DVD player. • CMP1 Y, P_, PR(Component Video) Provides optimum picture quality because the video is separated into three signals. Use three video-grade cables for the connection. When using CMP1 Y, PB, PR, make sure to connect left and right audio cables to the CMP1 L/MONO and R Audio Input jacks. • CMP1 L/MONO (Audio) Provides left audio connection. The left audio connector is usually white. • CMP1 R (Audio) Provides right audio connection. The right audio connector is usually red. • CMP2 Y, PB, PR, and L/MONO and R Audio Allows you to connect a second component video source. Their description is the same as CMP1 above. When using CMP2 Y, PB, PR, make sure you connect the left and right audio cables to the CMP2 Audio jacks. [b]COMPOSITE INPUTS Lets you connect another component such as a VCR, DVD player, or laserdisc player. Its AUDIO jacks are the same as described for CMP1 above. • VlD1 S-VIDEO Provides better picture quality than the video jacks (VlD1 and 2 Video) because the color part of the signal is separated from the black and white part of the picture. When using VID1 S-VIDEO, make sure to connect left and right audio cables to the VlD1 L/MONO and R Audio Input jacks. • VID1 V (Video) Provides composite video connection. The video connector is usually yellow. • VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a component such as a VCR, DVD player, or laserdisc player. Their description is the same as VID1 above. Note: Do not connect on S-Video and Video cable at the same time in either VID1 or VID2 jacks.[/b][/quote]
Options HTML is OFF BBCode is ON Smilies are ON	Disable BBCode in this post Disable Smilies in this post

All times are GMT

Latest Service Manuals : Pye QB3 PYE (GB) • Panel AUO M240HW02 V1 0 [DS] . Various • bu2522a Inchange Semiconductor • TKR-840 B51-8506-00 Kenwood • HE-00-0053 Philips • an 931 HP • kseries . Various • Precaution Samsung • buk7520-100a buk7620-100a Philips • 2sa1941 Toshiba •