Author |
Message |
Guest |
Posted: Mon Feb 18, 2008 8:14 am Post subject: Re: packard bell lcd tv |
|
mool wrote: |
when turned on, picture flashes for a micro second then goes blank. sound still works, some say maybe backlight??? model # lcd tv 170ASW...
can you help ? any ideas?
thanks in advance. |
We are the Authorised Spare Parts & Repairer for :
ALL PACKARD BELL Monitors,
especially for the :
Packard Bell 170ASW 17" Widescreen LCD Monitor TV ;
Packard Bell 300ASW 30" Widescreen LCD Monitor TV ;
Packard Bell SV900 SlimView 19" LCD Monitor ;
Packard Bell SV700 SlimView 17" LCD Monitor ;
Packard Bell VT700 17" LCD Monitor ;
Packard Bell FT700 17" LCD Monitor ;
Packard Bell SV500 SlimView 15" LCD Monitor ;
Packard Bell VT500 15" LCD Monitor ;
Packard Bell FT500 15" LCD Monitor ;
Please email me for Quotes : formosa-ricky@optusnet.com.au |
|
|
Guest |
Posted: Mon Feb 18, 2008 8:12 am Post subject: |
|
We are the Authorised Spare Parts & Repairer for :
ALL PACKARD BELL Monitors,
especially for the Packard Bell 170ASW 17" Widescreen LCD Monitor TV ;
Packard Bell 300ASW 30" Widescreen LCD Monitor TV ;
Packard Bell SV900 SlimView 19" LCD Monitor ;
Packard Bell SV700 SlimView 17" LCD Monitor ;
Packard Bell VT700 17" LCD Monitor ;
Packard Bell FT700 17" LCD Monitor ;
Packard Bell SV500 SlimView 15" LCD Monitor ;
Packard Bell VT500 15" LCD Monitor ;
Packard Bell FT500 15" LCD Monitor ;
Please email me for Quotes : formosa-ricky@optusnet.com.au |
|
|
sapper |
Posted: Wed Sep 19, 2007 8:41 am Post subject: packard bell 170asw |
|
Any advance in solving this. Mine is displaying same symptoms. av inputs work fine until vga connected then picture breaks up. vga shows no signal. Worked fine until a few days ago when computer image started 'tearing' from rh side,got rapidly worse. All advice welcomed thanks. |
|
|
rsfusion77 |
Posted: Mon Aug 27, 2007 3:41 pm Post subject: LCD |
|
Although, not familiar with that particular model, it sounds like a fault with your controller board, and not the inverter. Try any electrolytics around the processor. Also I'd check the 3.3v regulators..
Good luck,
Ralf |
|
|
SZASZ |
Posted: Mon Aug 27, 2007 2:58 pm Post subject: |
|
Are you shore that the inverter is OK ?
How you have tested the Lamps? just, and see that when whit no input you can see "NO Signal message"?
Between the mainboard and inverter it must be 4 wires
-12V or24
-GND-
-ON/OFF (5V)
- Brightness (1,2V-3,4V)
Else Faulty soldering (e.g. dry or bridged) on inverter board. |
|
|
Guest |
Posted: Sat Aug 25, 2007 11:48 pm Post subject: same problem |
|
anyone ever find anything or is it stuffed? |
|
|
Guest250 |
Posted: Mon Jul 02, 2007 8:30 am Post subject: 170asw blank |
|
Hi, I too am having this problem. Packard Bell (now owned by NEC) won't fix it.
Anyone have any solution??
Thanks |
|
|
Guest |
Posted: Mon May 14, 2007 6:47 am Post subject: Re: packard bell lcd tv |
|
mool wrote: |
when turned on, picture flashes for a micro second then goes blank. sound still works, some say maybe backlight??? model # lcd tv 170ASW...
can you help ? any ideas?
thanks in advance. |
Hi have the same problem and seems no one can help as Hewlett packard have folded and nobody knows where to source the info needed. Any help would be appreciated. |
|
|
GUES |
Posted: Sun Apr 22, 2007 9:50 am Post subject: 170asw |
|
Hi
Have you repaired this fault yet, i have 2 systems showing the exact same signs as youselves. help would be greatly appreciated |
|
|
Guest |
Posted: Mon Jun 05, 2006 3:25 pm Post subject: Re: packard bell lcd tv |
|
I have this exact same problem! It's only when I have my PC connected via VGA cable, tho. My digital tv box connected thru the S-video port displays without any problem. I thought it might be the computer, but plugged it into my tv and it displays fine thru there. So then thought it might be the cable, so plugged laptop into vga cable and had same problem as with pc. Which port are you plugging into? |
|
|