| Author |
Message |
| mhuk |
Posted: Fri May 19, 2006 1:23 am Post subject: |
|
I got as far as 9.2 and then couldn't work out where one of the tabs was so put it all back together and gave it a try. Guess what? It works! Pushing the tab back that lifts the laser up to the dvd seems to have "fixed" it.
Thanks again  |
|
 |
| Guest |
Posted: Thu May 18, 2006 12:42 am Post subject: Misadventure |
|
| gary wrote: |
| NOT AN EASY MECH TO RESET, SEND ME YOUR EMAIL ADDRESS AND I WILL SEND YOU THE INSTUCTIONS. |
Well that was a bit messed up...   |
|
 |
| gary |
Posted: Wed May 17, 2006 4:13 pm Post subject: |
|
| click on navigator then section 9 |
|
 |
| mhuk |
Posted: Wed May 17, 2006 3:54 am Post subject: |
|
It opens correctly, just stops on the close. Which section is for realigning the tray?
Thanks again  |
|
 |
| mhuk |
Posted: Tue May 16, 2006 8:25 pm Post subject: |
|
Thanks for your help, PM sent  |
|
 |
| gary |
Posted: Tue May 16, 2006 8:11 pm Post subject: |
|
| MECHANICAL ALIGNMENT IS POSSIBLY INCORRECT, EVERYTHING ON THIS MODEL IS DRIVEN FROM THE SLED MOTOR, IF TRAY IS OUT BY 1 TOOTH IT WILL FAIL TO LOAD CORRECTLY. NOT AN EASY MECH TO RESET, SEND ME YOUR EMAIL ADDRESS AND I WILL SEND YOU THE INSTUCTIONS |
|
 |
| mhuk |
Posted: Tue May 16, 2006 6:43 pm Post subject: |
|
When I press the "close" button the tray starts to close then stops. The little piston that appears to close the tray moves a few times then stops. If I push the tray closed the disk just sits in the tray- the "spindle" appears not to move up to the disk (as I guess it thinks the tray is still open). So no it doesn't move if I touch the dvd.
Ideas? |
|
 |
| mhuk |
Posted: Tue May 16, 2006 5:46 pm Post subject: |
|
Doh! I should have thought of that- I'll have a go and see what happens  |
|
 |
| gary |
Posted: Tue May 16, 2006 5:42 pm Post subject: |
|
| TAKE THE LID OFF THE SET, WHEN THE TRAY CLOSES YOU WILL BE ABLE TO SEE THE DISC IN THE MECH, I USUALLY USE A COTTON BUD TO GIVE IT A START IN THE CLOCKWISE DIRECTION. |
|
 |
| mhuk |
Posted: Tue May 16, 2006 5:21 pm Post subject: |
|
| Thanks for the reply. How do I nudge it if the tray is closed? |
|
 |