Author |
Message |
Heartwood |
Posted: Wed Jun 06, 2012 7:35 pm Post subject: N4060W powers down erratically after turning on |
|
If a N4060W shuts itself off after being on a while, what might the problem be? It turns on fine. Thanks. |
|
![](templates/subVereor/images/spacer.gif) |
ranger203 |
Posted: Fri Jul 08, 2011 7:06 pm Post subject: Fixed mine too. |
|
Thanks for the info. I replaced those 2 capacitors also and it is fixed now. Here is a link to some pictures. Nice the bubbled up caps. |
|
![](templates/subVereor/images/spacer.gif) |
bgbevan |
Posted: Sat Jun 25, 2011 1:46 pm Post subject: |
|
I have the sister model, Viewsonic n3760w. My service manual does not show the caps you referenced as C21 & C22. In fact, I don't show anything larger than 100 mfd on the schematic. Haven't pulled the board yet so any additional info on physical or schematic location appreciated. Would like to order the proper caps so can replace them right away.
Bill Bevan |
|
![](templates/subVereor/images/spacer.gif) |
jEWEL |
Posted: Fri Jan 28, 2011 3:42 am Post subject: Part number |
|
Hello the part number is FSP276-3F01 and can be found in stock at http:// www. electronica-usa .com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=EU&Product_Code=FSP276-3F01 hope this helps |
|
![](templates/subVereor/images/spacer.gif) |
Syky CZ |
Posted: Thu Jan 27, 2011 6:06 pm Post subject: Thanks!!! |
|
I repaired it in 1 EUR ) |
|
![](templates/subVereor/images/spacer.gif) |
Rog |
Posted: Thu Mar 04, 2010 5:01 am Post subject: MINNIE ROCKS!!! |
|
minnie wrote: |
Check CS22 and CS21 (1500mfd at 16volts) in the power supply to see if the tops are mushroomed up. |
Minnie, you saved me from having to spend $700 to replace my 3 YO 4060! ordered the Caps for C22 and C21 from digikey.com....used part number P10254-ND...panasonic Caps that were fatter, but lead spacing was the same....fit the board perfectly! will hopefully last longer than the skinny CrapXon caps that came on the board. They cost 90 cents each.
If you're having this problem, don't be a coward!! Fix it yourself!!
THANKS AGAIN!!! |
|
![](templates/subVereor/images/spacer.gif) |
jayseeyes |
Posted: Thu Jan 28, 2010 6:23 pm Post subject: viewsonic N4060W 'Power-On' woes |
|
I have a N4060W that took 20-50 times of 'turning-on' the power for switching the TV on. Thanks to suggestions in this thread, I fixed it easily.
Had the capacitors CS22 and CS21 (1500uF / 16V) replaced and the TV is back to normal again! Thanks Minnie (and all)! |
|
![](templates/subVereor/images/spacer.gif) |
minnie |
Posted: Mon Oct 19, 2009 11:47 pm Post subject: Re: Viewsonic n4060w dead- bad PS leaking caps |
|
PDMeat wrote: |
CS19, 20, 21, 22, and 28 are all bulged and most are leaking slightly. I've seen worse on PCs but they definitely have issues. |
This is what he replaced to fix it. |
|
![](templates/subVereor/images/spacer.gif) |
Steviee |
Posted: Mon Oct 19, 2009 8:27 pm Post subject: Re: Thanks for the help |
|
do you mind sharing how? I am having the same issue with my n4060w. it doesnt power on till i hold down the remote for a min or two. Minnie - do you happen to know the part number for the power supply. Thanks in advance guys. Misery does love company
[quote="Stan"]Don't know if minnie is still around and will read this. I found this thread when my viewsonic N4060W died and I fixed it for under $10.00. Thanks for the info.[/quote] |
|
![](templates/subVereor/images/spacer.gif) |
minnie |
Posted: Mon Jul 27, 2009 10:09 pm Post subject: |
|
![Very Happy](images/smiles/icon_biggrin.gif) |
|
![](templates/subVereor/images/spacer.gif) |