Author |
Message |
vaio |
Posted: Sat Dec 05, 2009 1:51 pm Post subject: |
|
Answer for my previously question about logic board compatibility !!!
The LJ41# is the designation for the raw unpopulated board before components were installed and I never advise using that number for part ID.
The LJ92# is the one you need to use to identify the correct part number. The alpha character at the end has to do with additional modifications.
These boards are to be thought of as forward compatible, meaning you can replace an “A” version with a “B” version however I would not advise replacing a “B” version with an “A” version. Basically considering any of these parts as backward compatible is not advised.
Concerning the A/B/C/D…. scenario, if none of the alpha characters have a circle, slash, marked out or otherwise indicated, consider it an “A” version. |
|
![](templates/subVereor/images/spacer.gif) |
vaio |
Posted: Sat Nov 28, 2009 9:42 pm Post subject: |
|
I found this : )
My is V4 . |
|
![](templates/subVereor/images/spacer.gif) |
The_AntiRAM |
Posted: Sat Nov 28, 2009 9:34 pm Post subject: |
|
jts1957 wrote: |
Fred Flintstone only uses two wheels.
|
Funny,
I dislike drive these "cars", they are too "hungry" of "Servo Steering"
(' ') |
|
![](templates/subVereor/images/spacer.gif) |
The_AntiRAM |
Posted: Sat Nov 28, 2009 9:27 pm Post subject: |
|
Basically it's enough.
To know wich panel is fitted in your plasma you have to read it inside
not on the out side printed custom sticker.
You have to dismount the PCB boards and find where is written in the back
of the panel.
There should be a side where the complete code of the panel is printed, inclusive the needed "V" (Version of Development).
Anyway the matched coded of the boards should be sufficient.
(At the end it's a Samsung Display wich is commonly employed Even in PHILIPS).
The important thing is that boards SHOULD MATCH EVERYTHING NEEDED. |
|
![](templates/subVereor/images/spacer.gif) |
vaio |
Posted: Sat Nov 28, 2009 8:40 pm Post subject: |
|
How will I know what is code (V3 V4 or V5) of my panel ?
This is sticker fit on my panel .
How I will to know which Y-SUS is which code (V3, V4 or V5) , and which is for my panel , is it mark on board LJ92-01200A pba rev. AA5 enough ? |
|
![](templates/subVereor/images/spacer.gif) |
jts1957 |
Posted: Sat Nov 28, 2009 8:09 pm Post subject: |
|
Fred Flintstone only uses two wheels.
![](http://www.thecartoonpictures.com/data/media/108/the-flintstones.jpg) |
|
![](templates/subVereor/images/spacer.gif) |
The_AntiRAM |
Posted: Sat Nov 28, 2009 7:43 pm Post subject: |
|
There is one Y-SUS on ebay deutchland
the Artikel Nummer ist:320454517044
First You should match the Code of the panel fitted in your plasma
(V3 V4 or V5)
This aforementioned is for V4 |
|
![](templates/subVereor/images/spacer.gif) |
The_AntiRAM |
Posted: Sat Nov 28, 2009 7:37 pm Post subject: |
|
Of course they are made for German Market.
But the technology is the same , even a USA car has ever 4 wheels (' ')
Price for SUS BOARDS, like yours, are around 75 EUR // 120 EUR
(Used or refurbished parts)
Prices for BUFFERS Y-TOP and Y-DOWN are around 45 / 75 EUR
(Used or refurbished parts)
You can use those parts (USED) freely because they are commonly from
plasma with cracked/broken/dropped/smashed panels therefore they come from functional diplays.
Anyway ask EVER the seller all what you need before buying.
Cheers. |
|
![](templates/subVereor/images/spacer.gif) |
vaio |
Posted: Sat Nov 28, 2009 5:18 pm Post subject: |
|
YES my friend
My TV:
Fujitsu Siemens computers
MYRICA P42-2H
S26361-K1065-V170
REV.02
Made in GERMNANY
Is made and sale for Germany , when I was call USA Fujitsu they say - this is none USA model , this is model for Germany , please call Fujitsu Europe.
I hope that parts will not be so expensive .
Thanks VERY MUCH FOR YOUR HELP , I will report when problem be resolved.
My mail is: commanderboy@yahoo.com
Best wishes ... |
|
![](templates/subVereor/images/spacer.gif) |
The_AntiRAM |
Posted: Sat Nov 28, 2009 3:13 pm Post subject: REPAIR PLASMA TELLIE. |
|
In Deutschland findest Du alles, was du benötig.
In Germany you will find all what you need.
(' ')
Remember that are common parts between PHILIPS AND SAMSUNG
because of the type of panel.
And anyway this failure is a very common fault even in PHILIPS & SAMSUNG.
Cheers. |
|
![](templates/subVereor/images/spacer.gif) |