 Posted: Sat Feb 06, 2016 5:42 am Post subject: |
|
| That is an ancient one. It may be a bad tube however you must have the 1500v and 90v on either end. It can also be filter cap(s) in power supply.
Focus pin#8 should change around 140~275V. That will give you an idea. Check resistors in between the two voltages. There is a detailed schematic here. Page 72 shows all the power supply outputs. http://www.radiodatabase.nl/meetapparatuur/philips/PM3200/PM3200.htm |
|
| Posted: Sat Feb 06, 2016 3:07 am Post subject: Philips PM3200X osciloscope |
|
| The focus control does not work the trace is blur. The intens control does not work, The potenciometer is ok the 1500 is ok. Could some ripple or filtering ? Please help | |