 Posted: Sat May 13, 2006 5:58 pm Post subject: IBM ThinkPad battery refill |
|
| I changed Li-Ion cells in lapptop ThinkPad T22 battery, but there is no voltage on output of the battery gas-gage electronic. Before it was OK.
On battery side of gas-gage electronic is 11.4V. During the refill process the gas-gage has been disconnected completely and later connected to cells again. I have two explanations 1. the electronic inside disconnect the output 2. the electronic inside is damaged because I connected cells in correct polarity but random order (not ground first, max. plus second, ...). There are 4 MOSFET driven by M61040FP and processor M37516. Pls, do you have any advice? |
|
